23 The selected document has no subtraction buffer.
24 Only one Real column allowed
25 Only one Imaginary column allowed
26 Dual timebase within action window not allowed for FFT.\nMove the red vertical lines in the input window such that the sample interval is the same for all selected data points.
27 Real column is required
30 Incompatible file format or empty file.
31 Number of data points is too large.
32 Failed to open file
33 Abort.
34 Time was not recorded
35 I/O error.
36 File not open.
37 No disk present.
38 Nothing stored on disk.
39 No more disk space
40 End of file.
41 Dubious analysis selection.
42 Number of channels must be larger than 0.
43 External variable was not declared or is constant throughout the selection.
46 number of classes must be larger than 1.
47 division by zero.
48 value out of range.
49 Channel was not recorded.
50 No fit function defined.
51 Reached present sweep number limit.
52 Wrong file format.
53 Fit error.
54 Failed to create bitmap
55 Sweep is of different size.
56 Unrecognised file format
57 Unknown File extension *.???
58 Time constant too small or less than zero
59 Number of classes is less than number of fit parameters.
60 Mangled file.
61 All user-defined units are in use.
62 Ram memory is corrupt, leave the program
63 Not a *.CHA File
64 Singular matrix
65 Degrees of freedom equals 0
66 Both foreground and background colour are transparent (0). Select Tools->Outline/Fill colour to change pen or fill colour
67 Pen colour is transparent (0). Select Tools->Outline colour to change pen colour
68 No data.
69 Failed to create object
70 Failed to create graph
71 Bad colour palette
72 Not a valid *.his file
73 The *his file was saved under a different version number
74 number of sweeps must be larger than 1.
75 X and Y channels should be different
76 Not enough data
77 Only the data of the first object in the selection list will be pasted.
78 Less data points than template points.
79 Value too small
80 Under construction
81 Failed\nDifferent timebase in source and destination.
82 Data not found.
83 Equation was not defined.
84 No data on clipboard.
85 Not more than two columns of text allowed.
86 First column does not appear to contain a valid timebase.
87 array not allocated.
88 x and y channels may not be different.
89 The last x-column is not followed by a y-column and is therefore ignored.
90 The first error-column is not preceeded by an x- or y-column is is therefore ignored.
91 Error ?
92 No sound card installed.
93 Recorder is not active.
94 Device is not available.
95 File is read-only.
96 Failed to save file.
97 no bitmap was selected R,G or B
98 Not a valid TIFF file
99 BUG!
100 Failed to create requested object
101 odd number of brackets.
102 strange use of brackets.
103 nothing between brackets.
104 operand or argument is missing.
105 operator is missing.
106 a bug in the program?
107 illegal character.
108 wrong number of function arguments.
109 there is no parameter to fit.
110 function name is same as variable name.
111 can not delete buid-in function.
112 buid-in function.
114 domain error
115 Redundant entry.
116 Empty.
117 Inconsistent entry.
118 Cancelled
121 Usage is: remove line-number
122 Index too small.
123 Index too large.
124 Function does not accept constants
125 division by 0
126 Stack underflow
127 Stack overflow
128 The number of template data points needs to be a power of 2.
129 Only histograms containing a single curve are allowed for this function.
130 Unsupported Tiff File Format
131 Not a WAV file
132 Unsupported Wav File Format
133 Can not open file for write.\nFile is read-only?\nSave it under a different name.
135 I/O error: The file has been created by a more recent version of the program.
136 The two bitmaps have to be different.
137 Failed to start the recorder.
138 The convolution templates for the left and right channels must be of identical size.
139 (One of) the sound template(s) is not defined.
140 Can not convolve the two graphs, possibly they are of different sizes.
141 Failed to open clipboard. Another program may have reserved access.
1002 Shows a list with information on each record
1101 Copies the bitmap image of the current window to the clipboard.
1102 Copies the contents of the current window to the clipboard in vector format
1103 Change the input conversion units
1105 Cubic spline baseline correction
1106 Idealise single channel records
1109 Select a fitting function
1110 Fit current fitting function to data
1111 Idealise spike records
1209 Select records to subtract from all other records in the file
1210 Saves the current window position and size
1211 Copy selection to clipboard
1212 Paste clipboard
1213 Insert a (block of) empty cell(s)
1214 Insert clipboard contents in the worksheet
1215 Clears current selection
1216 Remove current selection
1217 Undo last action
1227 Set independent variable (X)
1228 Set dependent variable (Y)
1229 Set error of dependent variable (SEM of Y)
1232 Copy selection to clipboard in vector format
1233 Copy clipboard to drawing
1234 Remove current selection from drawing
1235 Undo last action
1236 Group the currently selected objects into a single one
1237 Ungroup
1238 Select pen colour
1239 Select Fill colour
1241 Select pen width
1251 Move the object closer to the viewer
1252 Move the selected object to the front
1253 Move the object to the background
1254 move the object farther from the viewer
1255 Select Font
1260 Create a bar diagram using the highlighted columns
1261 Create a line-plot using the highlighted columns
1268 Terminate updating this plot
1272 Select all objects in the current layer
1286 Repeat the last action
1292 Read the Help file
1305 Create a *chan file by Markovian simulation
1306 Invert an augmented matrix
1307 Estimate the number of channels by binomial analysis.
1309 Make a single plot showing the selected sweeps in a row
1314 Align the selected objects
1315 Get the a few standard statistical properties of the currently selected column
1316 HTML Help
1317 Use an other documents subtraction array.
1318 Make frequency spectrum
1319 displays sweeps in succession
1320 displays a single record at a time
1321 Create a frequency histogram or a probability-density histogram.
1324 Copy the current template to the clipboard
1325 (De-)Convolution of two columns
1328 Detect events by passing the template over the data
1329 Set the template function
1334 Simulate spontaneous synaptic currents
1336 Use two columns to create a polygon
1338 Flips object around a vertical axis
1339 flip object around a horizontal axis
1340 plot all recorded channels in the input window
1341 Enable/disable text sizing when sizing objects
1344 displays all sweeps in range
1348 Scale subtraction data
1349 Import a windows BMP bitmap
1350 Create an anaglyph using 2 bitmaps or merge RGB components of 3 bitmaps
1352 Change the contrast of the currently selected bitmap
1353 Remove background noise from image
1354 Save the currenly selected bitmap
1355 Create a peristimulus time histogram
1356 create a (spike) dot plot
1357 Smooth bitmap (low pass filter)
1358 Add, subtract or multiply two bitmaps
1359 Save the drawing sheet with spreadsheets
1364 Copy interchanging lines (rows) and columns
1390 Create a new drawing sheet
1392 Create a new spreadsheet
1393 Create an line plot
1394 Create a bar plot
1395 Save the document under another name
1396 Create a 16-bit wav file containing white or pink noise
1397 Create an audio spectrum
1398 Create a probability-density histogram
1410 Read about a particular menu item
1411 Save the document
1412 Superimpose two bitmaps (shift & rotate)
1413 Rotate the currently active bitmap
1456 Select two templates and convolve
1457 Select the entire spreadsheet
1506 Edit the current impulse protocol
1508 register the program
1510 Set current layer to layer 1
1511 Set current layer to layer 2
1512 Set current layer to layer 3
1513 Set current layer to layer 4
1514 Set current layer to layer 5
1515 Set current layer to layer 6
1516 Set current layer to layer 7
1517 Set current layer to layer 8
1518 Set current layer to layer 9
1519 Set current layer to layer 10
1520 Set current layer to a layer of your choice.
1525 Select all objects in all layers
1526 Switch between layers 1 and 2
24332 Opens a file for input
32450 Shell failure
32451 TShellMalloc::Alloc failed.
32452 Invalid Path
32453 IShellFolder::BindToObject failed.
32454 ::SHGetDesktopFolder failed.
32455 ::SHGetSpecialFolderLocation failed.
32456 IShellFolder::GetAttributesOf failed.
32457 ::SHGetFileInfo failed.
32458 IShellFolder::GetDisplayNameOf failed.
32459 ::SHGetPathFromIDList failed.
32460 IShellFolder::SetNameOf failed.
32461 IShellFolder::GetUIObjectOf failed.
32462 IShellFolder::CompareIDs failed.
32463 TShellItem is invalid.
32464 IShellFolder::EnumObjects failed.
32465 IEnumIDList::Clone failed.
32466 Attempt to read past end of TShellItemIterator list.
32467 IEnumIDList::Next failed.
32468 IEnumIDList::Skip failed.
32469 IEnumIDList::Reset failed.
32470 IEnumIDList pointer is zero.
32471 ::SHGetMalloc failed.
32472 IExtractIcon::GetIconLocation failed.
32473 IExtractIcon::Extract failed.
32474 TShellItem::Rename attempted on item that cannot be renamed.
32475 TShellItem::Copy attempted on item that cannot be copied.
32476 TShellItem::Move attempted on item that cannot be moved.
32477 TShellItem::Delete attempted on item that cannot be deleted.
